Windows 2008R2 & 32 bitni gonilniki
Posted by Marko Lipovec (Import), Nazadnje spremenjeno s strani MatjažS Admin on 29 March 2016 03:10 PM
|
|
|
Posted on: 15 Mar 2010 2:25 PM |
|
Priporočilo:
Marko Lipovec Xenon forte d.o.o. Leskoškova 11 1000 Ljubljana Tel: +386 1 54 84 800 Fax: +386 1 54 84 819 E-mail: podpora@xenon-forte.si Web: http://podpora.xenon-forte.si http://servis.xenon-forte.si http://forum.xenon-forte.si
Pri inštalaciji gonilnikov na strežnike in terminalskem tiskanju priporočam uporabo "Kyocera Classic PCL Universaldriver (certified and signed by Microsoft)".
Gonilnik je namreč univerzalen za vse Kyocerine tiskalnike, poleg tega pa enak za vse Microsoft 32 in 64 bitne operacijske sisteme, zato odpadejo težave s kompatibilnostjo, poleg tega so gonilniki cerificirani s strani Microsofta.
Pozdravljeni ponovno.
Upam, da ste že uspešno inštalirali KX gonilnike na vaš 2008 strežnik.
Sem pa v tem času našel še rešitev za ostale verzije gonilnikov za 32 bitne sisteme (opisana je procedura za HP):
http://www.shnake.com/blog/?p=228
Citiram opis rešitve z zgornje strani:
Unable to add 32bit HP drivers to a Windows 2008 64bit print server with “Please provide path to Windows Media (x86 processor)” error I created a queue for a new printer, installed the 64bit drivers and sent a test page. All was fine, so I decided to add the 32bit drivers so that some XP workstations would be able to print to it.
Each time I ticked the box, it would come up saying “Please provide path to Windows Media (x86 processor)” asking me for the ntprint.inf files from the i386 folder of the Windows media CD. Being 64bit Windows 2008, it doesn’t have an i386 folder on the media.
If you are having this issue with Windows 2008 64bit and HP drivers, here is the fix that I used below.
1. Go to a 32bit Windows Vista or 32bit Windows 2008 system and log on a user with admin rights on the print server.
2. Download the 32bit drivers you require for your printer and extract them.
3. Click on Start – run then type \\printserver (replace “printserver” with the name of your print server) and then double click on the printer, and install it. When prompted for drivers, point them to folder where you downloaded the drivers.
4. After it installs on the 32bit system, go into the local printers, right click on the network printer you just installed and choose properties, sharing, additional drivers and tick the x86 box. Click OK and the x86 drivers will upload to the server.
|
|
|
|
|
|
|
|
|
|
Posted on: 12 Mar 2010 12:48 PM |
|
Pozdravljeni , kot dogovorjeno v telefonskem pogovoru , vam posredujem naš problem še pisno.
Glavni server za tiskalnike je windows enterprise 2008 service pack 2
client masine so windows xp sp3.
Problem nastane ko hočemo instalirati tiskalnik preko serverja. Saj ne dopusca dodati x86 gonilnika , ker zahteva windows x86 disc in ntprint.inf , poskusili smo že z večimi diski, ntprint.inf datotekami , datotekami z service packov ipd. Z instalacijskega cdja sicer lahko instaliramo kyocere na client pcjih vendar to žal ne gre čez strežnik kar nam je primarni problem.
LP Martin Preželj Unistar LC d.o.o., Ljubljana
|
|
|
(65 vote(s))
 This article was helpful  This article was not helpful
|